SKU: DCS-12V-100Ah-Victron
12V 100Ah + Victron Smart MPPT 75/15 + Victron Smart 30A dcdc charger


12V 100AH Lithium Ion Battery

  • DCS Battery delivers a minimum of 2500  Cycles
  • Ideal replacement for Gel or Lead Acid Batteries

Smartsolar Mppt 75/15

  • Ultra-fast Maximum Power Point Tracking
  • Load output for prevention of over-discharge of the battery

Victron Smart 30a Dcdc Charger

  • Dedicated solar regulator
  • Dedicated dcdc charger
  • Both fully programmable via Bluetooth
  • Obtain full 30A from engine + whatever current the solar panels will provide

Price Incl. GST

$1,699.00 AUD

Share on
Nominal Voltage 12.8V
Nominal Capacity (1Hr) 100Ah
Dimensions Length: 328mm, Width: 171mm, Height: 215mm
Weight 13.0 Kg
Cycling voltage 11.5 ~ 14.6V
Charge voltage 14.0 ~ 14.6V
Float Voltage 13.5 ~ 13.7V
Maximum Charge Current 100A
Recommended Charge Current ≤70A
Maximum Discharge Current ≤200A
BMS (built in) Automatic cell balancing, over discharge/charge
Cell Chemistry DCS 3.2V 7.2Ah Cylindrical (LifePO4)
Cycle Performance 2500 Cycles @ 100% DOD
LCA 1000
Engine cranking Max 3000W starter motors
Ingress Protection IP54
Case ABS (flame retradent plastic)
Operating temp Range -30 to +80 degrees C
Terminals Top Mount M8 Stainless steel / Copper
Parallel Connections Only YES
Series Connections No
Warranty 5 years return to base warranty

12V 100AH Lithium Ion Battery 

DCS Batteries are the ideal drop in replacement & upgrade from AGM, Gel or other lead acid batteries for any application.  DCS gives you the ability to upgrade your current batteries to lithium ion technology that can deliver a minimum of 2500 cycles and has tremendous advantages in weight, performance, reliability and service life compared to that of traditional lead acid batteries.

Smartsolar MPPT 75/15

  • Built-in Bluetooth Smart
  • Direct For a wired data connection
  • Ultra-fast Maximum Power Point Tracking
  • Load output for prevention of over-discharge of the battery
  • Intelligent battery management
  • Ready to set-up and monitor
  • Free VictronConnect app
  • External battery voltage and temperature sensing

Victron Smart 30A DCDC Charger

The output current will reduce at high ambient temperature. When installed with the screw terminals oriented downwards. No special tools needed for installation. The engine is running detection is based on the voltage of the starter battery. The charger is not always able to measure the exact starter battery voltage because of voltage drop over the input cable.


DCS Bluetooth Technology powered by DCS LFP, this APP is only for DCS LFP batteries which is based on BLE 4.0 technology.

This App provides comprehensive monitoring for DCS LFP batteries, including:

  • SOC%
  • Battery pack voltage
  • Amp meter – charge and discharge current
  • Battery Management MOSFET temperature
  • Individual Cell Status with balancing indicators.
  • Connectivity distance up to 10 meters.