ULTIMATE DCS 12V 150AH DUAL BATTERY SETUP (LITHIUM)

FREE DELIVERY AUSTRALIA WIDE

– 2 x DCS 75Ah LFP batteries
– Victron Battery Protect SBP-100
– Max alternator output 150Amps
– Backed by a 3 year under bonnet replacement warranty.
– Fully programmable via bluetooth
– Tiny power consumption 1.5mA when engaged

$2,480.00 AUD $1,899.00 AUD

Share on

– Fully programmable automatic isolation of loads, recommended isolation voltage is 12.8V (isolates both batteries for starting at 20%SOC)
– Automatic engagement at 13.0V (turns loads back on at 30%SOC)
– Ensures your automatically starting off both batteries every time, providing over 1500 LCA’s for engine starting
– With 150Ah of total storage means you have 150Ah x 20% = 30Ah always there for engine cranking. Allowing the upper 80% for deep cycling 120Ah.

Why do we use the latest fully programmable Victron Smart Battery Protects? Because they only have a 1.2mA engaged current draw and the isolators will spend 99% of their service life engaged.
They have bluetooth so via the Victron Connect App you can make quick and easy adjustments, override the isolators and check battery voltages. It also means you don’t need to go pulling the car apart to get to it to check it.
These isolators should be installed as close to the batteries as possible but inside the cabin they are not suitable for engine bay installations.

1

Toyota Hilux 8th Gen – DCS Lithium dual battery setup. All latest generation of 4WD vehicles using smart alternators do not require DC-DC chargers when running DCS lithium batteries.

3

Toyota Prado 150 – DCS Lithium dual battery setup

4

Prado 90 series – dual DCS lithium 75Ah batteries

batteries

Dual DCS 12V 75Ah batteries installed in a Toyota Land Cruiser Prado 150

150

Dual DCS 12V 75Ah batteries installed in a Nissan Patrol Y62

BATTERY SPECIFICATIONS

SMART BP SPECIFICATIONS

Wiring Diagram