SKU: VIC.BPP920140100
Victron GX Tank 140

The GX Tank 140 is an accessory used with a Victron GX device, it enables up to four tank level sensors to be connected and monitored.

Original price was: $194.70.Current price is: $175.20.

Share on

The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for the Victron range of GX system monitoring products, such as the Cerbo GX Controller

Tank levels can be read-out locally in the system, as well remotely through Victron’s VRM Portal.

GX Tank 140 Features:

 

  • Interfaces with either 4 to 20mA or 0 to 10V tank level sensors (including a combination of both).
  • Connection to the GX Device via USB interface.
  • Channel 1 and 2 use a fused power source from the Vin connection for sensor excitation.
  • Channel 3 and 4 use an integrated 24V power source for sensor excitation, which is powered via the USB interface.
  • The integrated 24V power source simplifies the installation/wiring process, as no additional power source is required.
  • Configurable input range, for example to connect a 0 to 5V sensor.
  • Configurable averaging filter (1 to 60 seconds) to dampen the effect of fluid movement.
  • Sensor fault detection: an alarm is raised if the input signal is out of normal/acceptable operating range.
  • Full integration with a GX device for configuration, monitoring and tank pump (relay) control.

The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires required.

Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is a power in terminal together with fused outputs to facilitate that.

Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example 0 to 5 V.

To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.

Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.

For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.

”TEXT”

victron gx productVictron GX Product Monitoring Solution

Victron GX Product is the best Monitoring Solution for your power generation system. The Victron Cerbo GX ensure you are aware of every bit of information of your power generation system. We stock power monitoring product that help you manage power control to and from Generator, Solar Panels, Battery Bank and distribution of AC loads.

Victron Gx Product is the best Monitoring Solution

Victron Gx Product is the best monitoring solution. With Victron GX Cerbo, you are always aware of every bit of information about your power generation system. The Victron Cerbo GX ensures that all vital parameters are in safe range and that the solar panels, load control systems, inverters and battery chargers operate as they should.

It is a comprehensive monitoring solution for all Victron products:

  • Equalize and check real-time the status of each solar array via SMS/email/App notifications;
  • Monitoring voltage voltages at each panel individually;
  • View fault messages for each panel via SMS/email/App notifications;
  • Check battery status from anywhere in the world via SMS/email/App notifications;
  • Check output power at any time during operation via an internet connection (WiFi or mobile data).

Victron GX Product to Monitor Inverter, Chargers and Battery

The Victron Cerbo GX ensure you are aware of every bit of information of your power generation system.

Victron GX product is the best Monitoring Solution to monitor inverters, chargers and batteries. The Victron Cerbo GX ensure you are aware of every bit of information of your power generation system.

Manage Power Control To and From the System

The Victron GX is a complete monitoring solution for solar, wind and diesel generators. It can be used to monitor the power output of your solar panels, battery bank and generator. The Victron GX also performs as an inverter in that it is able to distribute AC power to loads throughout your home or business facility.

The panel will monitor voltage and current (in both directions), temperature and state-of-charge (SOC) of your battery bank(s). It monitors AC output from the inverter using a smart meter so that you always know how much power is being produced by your renewable energy system.

All this information can be viewed on an LCD display with intuitive menu commands making it easy to use.

The Victron GX functions well as part of an automated system when paired with other devices within our range such as:

Smart Home Energy Manager

Allows control over all connected devices from anywhere in the world

Solar Power Hub

Allows connection of up to 8 solar panelsYou can read more about these products below!

The Victron GX Tank Monitoring Solution is the best monitoring solution for your generator. It will give you more control over your power generation system and make sure that you are using the right amount of fuel for the different applications in your home or office.

Victron GX Product for Seamless System Monitoring and Control

If you’re running a solar system, off-grid setup, or a combination of both, having complete visibility of your power flow is non-negotiable. The Victron GX Product is built exactly for that purpose. It gives you a central hub to keep track of everything—from how much your panels are producing to what your batteries are storing and even your tank levels if you’re running water or fuel systems alongside.

At Deep Cycle Systems, we recommend the Victron GX Product for anyone who doesn’t want to be left guessing. Whether setting up in a remote shack, managing power on a yacht, or looking after a solar-powered home, the GX interface connects all your devices into one tidy dashboard. You get live feedback, alerts, and control from anywhere—via Bluetooth, Wi-Fi, or the Victron VRM portal.

How the Victron GX Product Enhances Power Management Across Solar, Inverter, and Battery Systems

The Victron GX Product becomes your energy command centre when everything is wired properly. Here’s what makes it stand out:

  • It links your solar charge controllers, inverters, and batteries into one system
  • You can monitor power use and generation in real-time, locally or remotely
  • It helps manage automatic generator starts based on battery status
  • With the GX Tank 140, it tracks your fuel or water tank levels, too
  • If something’s off—like a low battery or high temperature—you get notified straight away

In short, it’s more than a monitor—it’s peace of mind. And for Aussies who rely on solar, whether at home or out on the road, it’s one of the most practical upgrades you can add.

”Close”

Specification

SKU VIC.BPP920140100
Model # BPP920140100
Barcode # 8719076053781
Brand Victron Energy
Shipping Weight 0.1200kg
Shipping Width 0.080m
Shipping Height 0.090m
Shipping Length 0.130m
Shipping Cubic 0.000936000m3
Unit Of Measure ea