Whether you need a battery for lighting, solar storage, electric vehicle, or you have an inverter as a backup in case of a power cut out, 48v lithium ion battery is the best option to install in these applications. There are many advantages of using such batteries over a traditional lead-acid battery. However, to enhance their performance, you need a 48V lithium-ion battery charger. 48v lithium ion battery charger is maintenance-free and also helps your keep your batteries in good condition.
Deep Cycle Systems, one of the most trusted companies in Australia, offers reliable and long-lasting 48v lithium solar batteries and chargers at an affordable price. Being the most trusted company in the market, we know it is our responsibility to provide the best to our customers, and we strive to do that for our clientele. Most of our business is from word of mouth recommendations, and it stands a testament to the quality of our products.
At Deep Cycle Systems, we provide a reliable 48v lithium ion battery charger that too at an affordable price. The 48v lithium battery charger we provide will not only monitor your battery but will intelligent battery management; it will also enhance its life. Thus, whether you need 48V lithium chargers or a battery, purchase from us and get the best.
Lithium-ion batteries are incredibly well known and flexible. Found in PDAs, cars, power apparatuses, and a few different sorts of electronic gadgets, these battery-powered batteries also have an effect controlling material taking care of and air terminal ground support gear. The innovation behind lithium-ion batteries settles on them an extraordinary decision due to their particular potential benefits and harmless and environmentally friendly benefits. But for these batteries, their chargers are key tools for long run use.
How Exactly Does 48v Lithium Ion Battery Charger Work
48-volt charger technology has stayed up with the technology transformation, as in most different regions; thus, current battery charging reasoning uses 3 phase (or 2 or 4 phase) chip managed to charge profiles. These are the “smart chargers”, and quality units, by and large, are not found in retail locations. The three phases or steps in lead corrosive battery charging are bulk, absorption and float mode (or, in some cases, totally shut off at times). Capability or adjustment are at times thought to be another stage, generally for limited time purposes. Use battery producer’s suggestions on charging methodology and voltages, or a quality chip controlled charger, to keep up with battery limit and administration life.
Three-stage battery charging
The BULK stage in a 48v lithium ion battery charger includes about 80% of the re-energize, wherein the charge current is held steady (in a consistent current charger), and voltage increments. The appropriately measured charger will give the battery as much current as it will acknowledge up to charger limit (25% of battery limit in amp hours), and not raise a wet battery over 125° F, or an AGM or GEL (valve controlled) battery over 100° F. The objective voltage for a 48-volt charger for AGM or some overwhelmed batteries is 2.4 to 2.45 volts per cell, 57.6 to 58.8 volts.
The ABSORPTION stage (the excess 20%, around) in the AGM/overflowed 48-volt charger holds at the assimilation voltage (between 57.6 VDC and 58.8 VDC, contingent upon charger set focuses) and diminishing the current until the battery pack is completely energized. On the off chance that the battery pack will not hold a charge or the current doesn’t drop after the normal re-energize time, the battery pack might have some long-lasting sulphation.
The FLOAT stage is where the charge voltage is diminished to around 2.25 volts per cell, approximately 54.0 VDC and held steady, while the current is decreased to under 1% of the battery limit. This mode can be utilized to keep a completely energized battery pack endlessly. A few chargers shut off instead of keeping a buoy voltage and screen the batteries, starting a charge cycle if vital.
Get in Touch
If you have any queries, you can get in touch with us by giving us a call at, Tel: 1300 795 327.