DCS-LFP-1260 (12V 60AMP LIFEPO4 MAINS CHARGER)
DCS 12V 60Amp AC to DC LFP (LiFePO4) Battery Charger.
The DCS-LFP-1260 is a fully automatic AC mains to DC 12V LiFePO4 charger. Suitable for boats, RV’s, caravans and portable applications. These has been specifically developed for the high performance DCS 12V range of batteries. And powering off generators, with a soft start feature to ramp the generator up slowly.
- AC input voltage range is very wide between 200VAC to 260 VAC
- Fan cooled designed for 100% duty cycling
- Dimension 290 x 150 x 90mm
- 4KGs weight
- 2 Year Replacement warranty
- LCD Display with total Ah charged, voltage, charing duration & current
Out of Stock
Trina 440W Solar Panel
Small in Size, Bigger on Power
- Up to 440W, 21.9% module efficiency with high density interconnect technology
- Multi-busbar technology for better light trapping, lower series resistance, improved current collection and enhanced reliability
- Reduce installation cost with higher power bin and efficiency
- Boost performance in warm weather with low temperature coefficient and operating temperature
Availability: In Stock
Galvanic Isolator
Features
- Prevents electrolytic corrosion
- Waterproof (potted)
- Safe and Reliable
- Low noise and low weight
- Soft start
Cerbo GX
Features
- Perfect monitoring & control
- Maximise your system performance
- Expand your view
- Simple mounting and configuration
- Outsmart any power challenge
- Dual core CPU with 1 GB RAM
- 4 Resistive tank level inputs
- 4 Temperature sense inputs
VE.Direct to VE.Can interface
The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. To install the cable, simply connect it between the VE.Bus device and the solar charger(s). Separately powering the VE.Can network is not necessary, since it is powered by the solar charger(s). Same for the VE.Bus network, it will be powered by the VE.Bus device.
Octo GX
Features
- Intuitive system overview
- Remote Console
- 10 VE.Direct ports
- 2 paralleled RJ45 sockets
- Built-in WIFI with external antenna
- Built-in RS485 – Non-isolated
- 3 digital inputs
- Supply voltage 8 – 70 VDC
Energy Meters ET112, ET340 & EM24
The ET112 and the ET340 Energy Meters are typically used in an Energy Storage System and the EM24 is for 3 phase monitoring only. ET112 is for single phase with max. 100A, ET340 is for three phase max. 65A per phase and EM24 is for three phase max 65 A per phase Energy Meters.
It is used to measure the power and energy of the whole application at the distribution box or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
Venus GX
Features
- Energy Storage Systems – 24 hour Monitoring
- Remotely monitor your boat or motorhome electrics
- Remote Console
- Automatic Generator start/stop
- Data logging
- Tank level inputs
- Automatically updates itself from the internet
- Multiple languages
Orion-Tr Smart DC-DC Charger Isolated
Features
- Bluetooth Smart enabled
- Fully programmable
- Remote on-off
- High temperature protected
- IP43 protection
In Stock
DCS-LFP-1025 (48V 10AMP LIFEPO4 IP-65 MAINS CHARGER)
48V 10Amp AC to DC LFP (LiFePO4) Battery Charger
The DCS-LFP-1025 is a fully automatic AC mains to DC 48V LiFePO4 charger. This is a IP-65 spec charger, suitable for boats, caravans or ideal as an off grid backup charger. It has been specifically developed to be used as an onboard charger for golf carts.
10Amps at 51.2V (600W continuous)
- User selectable constant voltage charge at 58.4V OR 55.0V (16S, 3.2V nominal cells)
- Auto Resume Voltage at 52.5V (storage mode)
Availability: In Stock
Blue Smart IP22 Charger
Features
- Bluetooth Smart
- High efficiency
- NIGHT and LOW setting
- Protected against overheating
- Eleven LEDs for status indication
In Stock
ORION-TR SMART DC-DC CHARGER NON-ISOLATED
Features
- Bluetooth Smart enabled
- Fully programmable
- Remote on-off
- High temperature protected
- IP43 protection
GX GSM
Features
- Modem accessory for Venus-devices
- Provides a mobile internet for the system and connection to the VRM Portal
- A small indoor 2G and 3G GSM antenna is included
- Can be used with any of the GX Devices
- It has a built-in GPS receiver
- DC supply voltage range: 10-70V
Availability: Please call for Availability
Lynx Distributor
Features
- A modular DC bus bar
- Locations for four DC fuses
- Monitor the status of each fuse
- LED indicator
- Individual DC fuses per DC group
Orion-Tr DC-DC Converters Isolated
Features
- Remote on-off
- Adjustable output voltage
- IP43 protection
- High temperature protected
- Short circuit proof
VE.Net Blue Power Panel 2
Features
- Compatible control panel
- Intuitive control for all devices
- Can be used for view and configure settings
- The ideal monitoring tool
- Fully customisable
- Aluminium enclosure
- Integrated VE.Net to VE.Bus Converter
- Does not requires a computer or any other device to integrate
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
The SmartShunt is available in 500A & 1000A.
VE.Direct to NMEA2000 interface
This NMEA2000 drop cable makes the BMV-700 information available to an NMEA2000 networks. Battery information such as voltage, current and state of charge can be displayed on common purpose displays from other manufacturers which accept the NMEA2000 data being sent.
NMEA 2000 requires a single backbone where products must connect to with drop cables. The BMV drop cable is equipped with a Micro-C (M12) male connector for this purpose, intended to be connected to a corresponding T-connector in the backbone.
VE.Bus to NMEA2000 interface
It transmits monitoring information, AC voltages and currents, DC voltages and currents and the state. Other NMEA2000 devices can also send commands to the VE.Bus product to turn it on or off, or change the input current limit.
NMEA 2000 requires a single backbone where products must connect to with drop cables. The VE.Net to NMEA 2000 drop cable is equipped with a Micro-C (M12) male connector for this purpose, intended to be connected to a corresponding T-connector in the backbone
VE.Net Blue Power Control GX
Features
- Compatible control panel
- Intuitive control for all devices
- Can be used for view and configure settings
- Easy to install
- Fully customisable overview screen
- Plastic enclosure
- Integrated VE.Net to VE.Bus Converter
- Real-time system status read-outs
DCS 24V 10AH (Lithium)
Ultra-Safe
Explosion-proof / No leakage
Stable
Low Internal Resistance / Proven Stability
Long Life
Ultra-long cycle life
Guaranteed A Grade
Contracted A Grade cell supply
DCS Batteries are the ideal replacement & upgrade from AGM, Gel or other lead-acid batteries for any application. DCS gives you the ability to upgrade your current batteries to lithium-ion technology that can deliver a minimum of 2500 cycles and has tremendous advantages in weight, performance, reliability and service life compared to traditional lead-acid batteries.
Backed by a 3 year warranty.
VE.Bus to VE.Can interface
This interface is used in Hub-1 systems with grid-feedback enabled. It interfaces between the VE.Bus system and one or more MPPT solar chargers with a VE.Can connection: the MPPT 150/70 and/or MPPT 150/85. Many of our customers integrate our products into their own systems, using data communication protocols. There are several options to establish data communication.
DCS 200Ah Lithium Slim Line Battery Tray 316 Stainless
DCS 200AH Lithium Slimline Battery Tray Includes: 2mm lazer cut stainless steel construction. Screw in or bolt in fixture using 8 x pre-drilled fixing points.
Overall external footprint of the trays is 520 x 160 x 350mm
Australian designed and made here in Brisbane.
In Stock
Blue Smart IP67 Charger
Features
- Built-in Bluetooth
- Waterproof Charger
- Recovery of dead batteries
- The highest efficiency ever
- Two LEDs for status indication
In Stock
VE.Net GMDSS Panel
Features
- User-Friendly
- Easy to operate
- Access level setting to prevent accidental changes
- Password protected access level
- Additional GMDSS feature
VE.Net Panel
Features
- User-Friendly
- Easy to operate
- Access level setting to prevent accidental changes
- Password protected access level
Battery Monitor BMV-702 BLACK
Features
Calculates;
- Ampere hours consumed
- The state of charge of a battery
Battery Monitor BMV-702
Features
- Bluetooth Smart
- Additional input
- Easy to Install
- Easy to configure with smart phone
- Shows remaining time at the current rate of discharge
Orion DC-DC Converters Non-isolated, High power
Features
- Remote on-off connector
- Adjustable output
- Paralleled to increase output current
- Can be used as a battery charger
- Easy to install
Blue Smart IP65 Charger
Features
- It is resistant to chemical, durst, and water
- It has a 7 step smart charging technology
- Charges small batteries with low power mode
- It has an automatic power supply feature
- Many other features for enhance the life of your battery
Lynx Power In
Features
- A modular DC bus bar
- Used to connect batteries
- Useful for multiple parallel strings
- 22 mm cables in diameter through the bottom entry guides
- No limit via the two side connections
Skylla Control
The Skylla Control allows you to alter the charge current of Skylla Charger. It is simple and easy to operate. It also helps you see the system status through LED indicators.
Availability: Please call for Availability
Digital Multi Control 200/200A
Features
- An efficient remote panel
- Designed to work with all Multi & Quattro systems
- LED indicators with automatic brightness level
- Power Assist
- Stand alone, parallel and 2-3 phase configurations
- No extra set-up handling is required
- Generator support
- Helps in setting the system input current limit
Availability: Please call for Availability
VE.Net Tank Monitor (Resistive)
Features
- Monitors the amount of liquid in up to three tanks
- Quick status line for monitoring the levels
- It shows the level of tank in liters and percentage as well
- Shows the current rate of consumption
- Shows the estimated time until the tank is empty
- Shows the amount of liquid consumed in the last 2 days
Skylla-i Control GX
Features
- Control the charge current
- Monitor the system status
- Designed to work with all Skylla-i chargers
- Show the status of the connected Skylla-i charger
- Comes complete with both RJ45 bus terminators
Availability: Please call for Availability
Digital Multi Control 200/200A GX
Features
- An efficient remote panel with GX
- Designed to work with all Multi & Quattro systems
- LED indicators with automatic brightness level
- Power Assist
- Stand alone, parallel and 2-3 phase configurations
- No extra set-up handling is required
- Generator support
- Helps in setting the system input current limit
Availability: Please call for Availability
Battery Monitor BMV-700 kit
Features
- Bluetooth Smart
- Easy to install
- Easy to program with your smartphone
- Battery fuel gauge
- Time-to-go indicator
Argo FET Battery Isolators
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.
In Stock
LC200 Brackets for DCS 130Ah Hybrid batteries
These laser cut stainless steel brackets are designed for use only with the DCS 12V 130Ah hybrid batteries when installed inside the Toyota Land Cruiser 200 series.
Availability: In Stock
Charger Switch
This panel is intended for switching on & off all the models of Skylla-TG Charger. It is simple, easy to operate, and user-friendly. It shows the status of inverter through the LED indicator.
Availability: Please call for Availability
Zigbee to RS485 converter
This low power Zigbee standard allows for wireless data transmission over short distances. This devices are standard DC5-12V power and come with a small external antenna.
Argodiode
ARGO DIODE Battery Isolator with voltage compensating diode and alternator energize input.
Zigbee to USB converter
This low power Zigbee standard allows for wireless data transmission over short distances. The devices are USB 5V power and come with a small external antenna
VE.Can to NMEA2000 Micro-C male
This NMEA2000 cable is used to connect a Victron product with a VE.Can port to a NMEA2000 network. NMEA 2000 requires a single backbone where products must connect to with drop cables. The BMV drop cable is equipped with a Micro-C (M12) male connector for this purpose, intended to be connected to a corresponding T-connector in the backbone.
Cyrix-ct 12/24V-120A Battery combiner kit
Features
- Bidirectional voltage sensitive relay
- Intelligent battery monitoring prevents cycling
- Emergency parallel feature
- Easy to install
Victron Blue Smart IP22 Charger 12/15 (1)
Features:
• 15A Single Output Smart Charger
• Built-in Bluetooth
• Suitable for Lithium Batteries
VE.Bus Smart dongle
The VE.Bus Smart dongle is a Bluetooth Smart enabled VE.Bus interface, with battery temperature-and-voltage sensing. It communicates system information straight to your smart phone – using the free-to-use VictronConnect app.
When used with Multi- inverter/chargers the dongle provides on-battery temperature and voltage sensing capabilities – allowing compensation for possible cable losses which can occur during charging and discharging.
Phoenix Charger Control
Features
- Provides remote control of charge process
- Provides monitoring of the charge process
- LED indicators with automatic brightness level
- Helps in monitoring the charge status
- Offers output current adjustment
- Limits the power drawn from AC supply
- Helps in changing charging parameters
Availability: Please call for Availability
VE.Direct LoRaWAN AU915-928 module
Features
- Remote Monitoring and Control
- Allows you to view battery status or solar power
- Long Range Wide Area Network
Availability: Please call for Availability
Phoenix Inverter Control
Features
- Intended for Phoenix Inverters
- UTP remote monitoring and control socket
- Can also be used on a MultiPlus Inverter/Charger
- LED indicators with automatic brightness level
Availability: Please call for Availability
Interface MK2-USB
Phoenix chargers are ready to communicate with a computer through its RS-485 data port. All you need to link to your PC in order to be able to set and read out all parameters.
Interface MK3-USB
The MK3-USB allows you to connect your computer with all inverters and inverter/chargers that have a VE.Bus communication port.
Battery Alarm GX
Features
- A small and low cost alarm panel
- Allows you to monitor your battery bank
- Features both audible and visual alarms
- A potential free contact
- Programmable alarm thresholds and hysteresis
- Remote panel adjustments
Availability: Please call for Availability
VE.Direct to Global Remote interface
The VE.Direct to Global remote interface allows you to connect BMV 700 series products to a Global Remote. It is used to make BMV-700 information available on the Global remote.
Interface MK2.2b (VE.Bus to RS232)
Phoenix converters can communicate with a computer through their RS 232 communications port. All you need to connect your PC, in order to set up and read all the parameters, is the data connection kit as shown.
Diode Battery Combiner
The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V.
Orion IP67 24/12 DC-DC Converter
Features
- Waterproof
- Shockproof
- Ignition protected
- Protected against overheating
- Wide input voltage range
Victron Orion-Tr 12/12-9A (110W) Isolated DC-DC Converter
Features:
– 12V-12V / 9Amps
– DC-DC Converter
– IP43 Protection
– Short-Circuit Proof
– Adjustable Output Voltage
SmartSolar Pluggable Display
The SmartSolar plugged Display is a controller LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
VE.Direct Bluetooth Smart dongle
With the VE.Direct to Bluetooth Smart dongle you can get live status info, see historical values as well as configure Victron products. The dongle works together with the VictronConnect App, available for both Android and iOS devices. The dongle can be connected to almost all Victron products that have a built-in VE.Direct port.
AC Current sensor
The AC Current sensor is a simple external current sensor used to measure AC Current, Power (VA) and calculate energy of a PV Inverter connected to the AC input or output of a Multi or Quattro. Use the AC Current sensor to measure and visualise the solar production of a PV Inverter. The measurements will be visible on the GX device and on the VRM Portal.
Wall mount enclosure for Color Control GX and BMV or MPPT Control
Features
- Enclosure for Color Control GX and BMV or MPPT Control
- High-quality and reliable
- Durable and long lasting
Availability: Please call for Availability
Orion-Tr DC-DC Converters Non-isolated Low Power
Features
- High efficiency
- IP43 protection
- Screw terminals
- Safe and reliable
- Easy installation
Cables with M8 circular connector
Cables with M8 circular connector is used for 12.8V Li-Ion batteries. It is available in different sizes i.e. Male to Female 3 pole 1 m (bag of 2), Male to Female 3 pole 2 m (bag of 2), Male to Female 3 pole 3 m (bag of 2), Male to Female 3 pole 5 m (bag of 2). You can order any of them according to your choice.
Unilug Two Up Positive & Negative Terminals
- Heavy Duty Forged Brass Battery Lugs
- Anit-Rotating Terminal Clamp
- Moulded Nylon Battery Lug Cover
- Internally Threaded Adaptor Post
- Universal Flanged Hexagonal Bolts
- 1 x Positive & 1 x Negative
In Stock
RJ12 UTP Cable
Victron Energy RJ12 UTP Cable is available with different sizes including 0.3 m, 0.9 m, 1.8, 3 m, 5 m, 10 m, 15 m, and 30 m. For use with ESP System, BMV-600 and BMV-700 Energy meters, this is a replacement for the cable that joins the shunt and the meter.
Toyota MK3 Mini blade 7.5A
(Electronic fuse version) (Micro blade compatible)
The Toyota MK3 microblade version of the Alternator Voltage booster from all other diode booster units in that it is the only device of its type available that incorporates an auto resetting PTC fuse.
In Stock
